Differences

This shows you the differences between two versions of the page.

Link to this comparison view

sci_cable_config [2015/03/23 20:17] (current)
shelgame created
Line 1: Line 1:
 +----
 +==== Configure the BoostButton USB to SCI cable ====
 +----
 +
 +  - Plug the USB to SCI cable into your laptop. ​
 +  - Windows will automatically install drivers for it with the 'found new hardware'​ wizard.
 +  - Open Windows Device manager, and find the cable in the USB devices folder.
 +    - {{findusbdev.jpg}}
 +  - Open the settings panel for the cable driver.
 +  - Check the box for 'Load VCP Driver'​ on the '​Advanced'​ tab.
 +    - {{loadvcp.jpg}}
 +  - Save the settings, then unplug, and re-plug the FTDI cable.
 +  - Windows will re-load the cable and set it up as a COM port.