Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
add_a_pin [2015/02/10 09:49]
shelgame
add_a_pin [2015/03/10 09:51] (current)
shelgame
Line 1: Line 1:
-===== Adding a Pin to the SMEC or SBEC 60-way connector ===== 
- 
 {{howhard>​3}} {{howhard>​3}}
 +-----
 +===== Adding a Pin to the SMEC or SBEC 60-way connector =====
 +-----
  
 These instruction will show you how to add a pin/wire to the 60-way connector of the SMEC or SBEC. The added wire can be used, for example, to reflash the ECU, or to add an Intake Air Temp sensor. These instruction will show you how to add a pin/wire to the 60-way connector of the SMEC or SBEC. The added wire can be used, for example, to reflash the ECU, or to add an Intake Air Temp sensor.